How do I change the brakes and hardware kit on my back brakes?

I have a 1985 chevy s-10. 6 cylinder. 2 wheel drive. Standard. I have no idea how to start. I took the drum off and there is a bunch of black gunk and parts just fell everywhere. I bought a hardware kit and a set of shoes. The drum is ok. Does any one know were I can find an instruction manual or explain to me how to do this?How do I change the brakes and hardware kit on my back brakes?
I would suggest that you get the chilton repair manual for you make and model from your library.It should show you how it all goes together.Another way would be to remove the opposite wheel and brake drum and take a look at it to see how it is in place.How do I change the brakes and hardware kit on my back brakes?
type into search box

how to replace rear brake shoes



heres one pretty good oneHow do I change the brakes and hardware kit on my back brakes?
1 if you don't already know how to do brakes, why are you doing them?? Leave a safety item like that to someone who knows what they are doing. Even



2 IF THERE IS BLACK GUNK (like brake fluid or grease) THEN YOU HAVE A LEAKING WHEEL CYLINDER OR REAR axle SEAL THAT NEEDS TO BE REPAIRED BEFORE THE BRAKES ARE REPLACED



take this to someone who knows what they are doing.

acne fighting treatments

funny pet name

Does anyone know a good website that demonstrates how to change brake pads on your car?

I know brake drums are another story, but brake discs are fairly easy.Does anyone know a good website that demonstrates how to change brake pads on your car?
Seriously, there are tons of sites out there on how to change brake pads.



Simply googling it will give many sites, some even with videos.



http://www.********.com/lessons/brakeshoDoes anyone know a good website that demonstrates how to change brake pads on your car?
Just buy a Haynes or a Chilton repair guide. They are full of all kinds of repairs.Does anyone know a good website that demonstrates how to change brake pads on your car?
this is one of the easiest things to do to a car.

engage parking brake

loosen wheel lugs (dont remove)

jack up car and place on jack stands



remove wheel lugs and wheel



loosen and remove two bolts from brake caliper (varies by car)



remove brake caliper from top (a prying tool may be needed but should ultimately roll towards rear of car from the top.



remove old pads and put on new, you may need to compress the piston depending on wear (to do that remove lid from master cylinder and force piston to fully disengage, taking care not to damage it, a c-clamp and a peice of metal works great)



put everything back on in reverse order starting with the caliper and work your way back.Does anyone know a good website that demonstrates how to change brake pads on your car?
This one has good photos:



http://www.troublecodes.net/articles/frn





http://autorepair.about.com/od/fixityourDoes anyone know a good website that demonstrates how to change brake pads on your car?
www.autozone.com

How to change brake shoes on a piaggio typhoon 125cc moped?

My rear brake is not at all strong and there is alot of freeplay on the left lever. I have tightened the brake wire under the engine case to the fullest and there is no difference, so im assuming its the brake shoes worn out. (Its not a disc brake its a drum brake)



To change the brake shoes what will i need to do. Will i need to loosen the wire, then change the shoes, then tighten the wire back up?How to change brake shoes on a piaggio typhoon 125cc moped?
contact me via my avitar...ill give you a link for a free manual download...How to change brake shoes on a piaggio typhoon 125cc moped?
slow down, you probably dont need new brakes, there adjuster you need to tighten is on the brake drum lever, its just a nut that is screwed onto the actuating rod, you will see its threaded for 2 or 3 inches, you should just need to screw it in, if its that loose, you will probably have to screw it further on quite a bit, like 1/2 to 1 cm.

Should I change my 2002 OZ Rally Lancer's rear drum brakes to disc brakes?

My lancer has drum brakes in the back. Not really sure if they are strong enough to stop the car once I get all the power added that I'm planning. I honestly assume they won't, but I read in articles where drum brakes are just fine, and others that say I should convert them. Also, if anyone happens to know, how much would it cost around to get it done at a mechanic's shop? (an average)

Thanks.Should I change my 2002 OZ Rally Lancer%26039;s rear drum brakes to disc brakes?
It would be very expensive and you would gain very little.

Over 80% of braking is done by the front brakes.Should I change my 2002 OZ Rally Lancer%26039;s rear drum brakes to disc brakes?
i agree, most of the breaking is done with front brakes. i got drum brakes on mine and it works fine.

Converting drum brakes to disc brakes?

is it possible to change the rear drum brakes on a 2wd 94 chevy suburban to big disk brakes? if it is how much would it cost on average?Converting drum brakes to disc brakes?
yes its possible. as for cost heres what you need to consider.... first, do you wanna do it as a kit? or just swap the axle with another GM product like say a trans am axle that already has disk brakes. cost is hard to nail down here because there is alot involved. you will need to change more than just the brakes. ie: master cyclinder piston, brake distribution manifold block, parking brake, and does your truck have any kinda anti lock devices? ( hope not, those suck no matter what anyone says! ). generally the kit ( if avail for your truck ) would be the easier way to go as it will contain all that you need for a set price. please take the time to research this among the aftermarket suppliers. this research will also give you an idea of the work involved to do the project. curious to know why you would want to do this as the rear brakes only provide 30% of your braking. i could see it on a performance vehicle. if you use this truck for hauling, ponder using trailer brakes. much easier project than what your after now.

I have a 1994 honda accord lx and im am wanting to change the rotors and i was wondering how?

and im am wanting to change the rotors and i have disk on the front and drum brakes on the rear and what do you haftto do to change the drum brake into a rear disk brake?I have a 1994 honda accord lx and im am wanting to change the rotors and i was wondering how?
you only need the spindles/calipers/rotors, the control arms are the same except for the sway bar mounts. You will also need to use the ebrake cables since they are different lengths.I have a 1994 honda accord lx and im am wanting to change the rotors and i was wondering how?
to change rotor

jack up the car

remove the front wheels

remove two bolts behind the calipers and hang them loose

remove screws on the rotor then wobble it out

and install in new oneI have a 1994 honda accord lx and im am wanting to change the rotors and i was wondering how?
You'll need special brake tools, some big auto parts stores have free loaners.



You'll also need to turn the rotors and drums so there is no low or high spots. Some auto parts stores do this for free for buying the pads and shoes.



You'll need a micrometer to measure that there is enough metal on the rotors and brake drums. Again most auto parts stores can do this for free.







As for doing the brake job, I recommend buying the correct Chilton's manual for your car. It will give you step by step instructions and pictures. It will also give the correct minimum manufacturer specs to make sure the brakes will work correctly.I have a 1994 honda accord lx and im am wanting to change the rotors and i was wondering how?
By %26quot;Changing the rotors%26quot; do you mean your doing a brake job? To convert to Rear discs is not hard,You only have to replace the upper and lower control arms and the spindle assy on both sides.Why bother?,The OEM Drum is a great unit when working properly.By Google surfing you will be able to find all the parts for a nice job.Good LuckI have a 1994 honda accord lx and im am wanting to change the rotors and i was wondering how?
take it to les schwab and get it professionally done cost about $200 but u get like a 50,000 mile warranty so it might seem a lilttle costly but well worth than doing it yourself

Looking for a sample hosting

cute hair

Changing from drum to disc brake!?

Is it hard to change your drum brakes to disc brakes? How do you change your brakes from drum to disc?Changing from drum to disc brake!?
Why? Drums work fine.Changing from drum to disc brake!?
You would simply install the kit you bought for your vehicle by following the instructions. It also helps to know the type of vehicle , and if there is a kit , or you have to piece something together from the wreckers. Hey Someone! keep your crap to yourself, We don`t need your junk on here.Changing from drum to disc brake!?
hard not so much but costly. better to just ask a parts store or shop if it can be done on your car or truck sometimes its just not worfth itChanging from drum to disc brake!?
Have a professional do the job.Changing from drum to disc brake!?
It's not hard but one has to ask why? On a street driven vehicle there is no larger waste of money. You will get no performance benefit.